|
| |
Guidelines for a Perfect Fit
-
Measure each window individually, as size variances
are common.
-
Measure width first, then height to the nearest
1/8".
- Use a steel tape measure. Do not use a cloth tape.
- Select your window fashion type for measuring instructions:
Horizontal Blinds
and Fabric Shades
Inside mount:
-
Inside mount blinds and shades are installed inside the window casing.
Minimum depth requirements vary by product and head rail type. Ask for
individual product details.
-
Measure the exact inside width of window casing from one inside edge to
the other in three different places. Record the
narrowest
measurement.
-
Measure the exact height in three different places from top edge of
opening to top of sill. Record the
longest measurement.
-
Do not take any deductions for clearance. The factory will take necessary
deductions for a perfect fit.
Outside Mount:
-
Outside mount blinds and shades are installed outside the window casing,
covering an area larger than the window itself.
-
Measure the exact width to be covered. Be sure the measurement overlaps
the window opening by at least 1-1/2" on each side (3" total overlap) to ensure
light control and privacy.
-
Measure exact height to be covered, including desired overlap (typically
from top edge of molding to bottom edge, or to top of sill if there is one).
-
The factory makes NO allowances on outside mount.
Vertical
Blinds
Inside Mount:
-
Inside mount blinds are installed inside a window casing or door, or wall
to wall in a room. The window casing must be at least 2-3/4" deep for track
flush mount or 3-3/4" deep for
louvers flush mount. Otherwise, an angle bracket
may be necessary.
-
Measure the exact inside width of window casing from one inside edge to
the other in three different places. Record the
narrowest
measurement.
-
Measure the exact height in three different places from top edge of
opening to bottom, or top edge of sill if there is one. Record the
shortest
measurement.
-
Do not take any deductions for clearance. The factory will take necessary
deductions for a perfect fit.
Outside Mount:
-
Outside mount blinds are installed outside the window casing, covering an
area larger than the window itself.
-
Measure the exact width of window, including frame if there is one.
Add
3" for each side (6" total overlap) to ensure light control and privacy.
-
Measure height of window from top edge of molding to bottom edge, or to
top of sill if there is one. Add 3" to allow for adequate mounting area above
the window.
-
If blind extends to floor (i.e., to cover patio door), measure height in
three places, take the
smallest measurement and deduct at least
1/2" for clearance so the louvers don't touch the floor.
-
The factory makes NO allowances on outside mount.
NOTE: If you want the entire window uncovered when the
blind is fully open, you may need to add more than 6" to the width.
For instructions on measuring for specialty shapes, such as arches, call
for details!
Made in the Shade Blinds of the South Shore
Laurie LaGumina
(781) 834-0967
(508) 747-5077
We're "Covering" the South Shore
|
